Quck answer
Ball bearing drawer slides are a common feature in many furniture pieces, but they can wear out over time. To repair ball bearing drawer slides, follow these steps:
1. Remove the drawer from the slide by pulling it out fully.
2. Inspect the slides for any damage or debris. Clean them thoroughly if needed.
3. Check the ball bearings for any signs of wear or damage. Replace them if necessary.
4. Lubricate the slides with a silicone-based lubricant to ensure smooth operation.
5. Reinstall the drawer onto the slides and test its movement.
6. If the slides are still not functioning properly, consider replacing them altogether.
By following these steps, you can easily repair ball bearing drawer slides and prolong the lifespan of your furniture.
Some cabinets and tool boxes are fitted with ball bearing slides that use ball bearings to ensure a smooth opening and closing of the drawers. However, with time, the lubricant dries out, and the drawer becomes harder to open. To resolve this issue, you only need a few items to get your ball bearing drawer slides working like new again.
Step 1
Empty the drawer of all contents and open and close it to confirm whether it’s the ball bearings or any objects inside that’s preventing it from opening and closing properly.
Step 2
Remove the drawer from its recess by pulling it out and up. Check both the rails on the drawer and the recess to see if there are any foreign objects obstructing the ball bearings. If there are, remove them with a pair of tweezers or by hand.
Step 3
If necessary, straighten out any kinks or bends in the drawer slides with needle-nose pliers.
Step 4
Apply mineral oil to a microfiber cloth and rub it along the slides and over the ball bearings several times. Also, coat the other rails with mineral oil.
Step 5
Reinsert the drawer into the recess and open and shut it several times to ensure that it glides in and out smoothly.