Quck answer
To replace a battery in a Honeywell alarm system, follow these steps:
1. Locate the battery compartment on the control panel of the alarm system.
2. Open the battery compartment by removing the cover or panel.
3. Take out the old battery from the compartment.
4. Make sure to note the battery’s orientation before removing it, so you can insert the new battery correctly.
5. Insert the new battery into the compartment, ensuring it is placed in the correct orientation.
6. Close the battery compartment by putting the cover or panel back in place.
7. Test the alarm system to make sure it is functioning properly with the new battery.
By following these steps, you can easily replace the battery in your Honeywell alarm system and ensure its continued operation.
It’s easy to replace the battery in your Honeywell home security system. When the battery is running low, the display on the keypad will read “BATT,” indicating that it’s time to perform this simple task.
Replacing the Keypad Batteries
Step 1
Enter your security code to disarm the alarm system. If your system is AC-powered, ensure that the AC cord is unplugged from the outlet.
Step 2
If your keypad is wall-mounted, remove it from the mounting plate by pulling the top out slightly and lifting the keypad straight up.
Step 3
Locate and remove the battery compartment cover on the back of the keypad.
Step 4
Remove the old battery or batteries (which may be one nine-volt battery or three AAs) and replace them with fresh ones.
Step 5
Replace the battery compartment cover and slide the keypad back onto the wall mount.
Replacing the Main Battery
To replace the 12-volt battery that powers your Honeywell security system, you’ll need to open the metal “can” that’s usually installed in your basement or utility room.
Step 1
Unlock and open the can door using the key provided (which is usually stored on top of the can).
Step 2
The 12-volt battery is located at the bottom of the can and is connected to the alarm system with simple clips. Disconnect the two wires (one red and one black) using light pressure or a flathead screwdriver, if needed. Remove the old battery and set it aside.
Step 3
Insert a new 12-volt battery in the same place as the old one.
Step 4
Connect the black wire to the black terminal of the battery and the red wire to the red terminal.
Step 5
Close and lock the can door.
Step 6
Using the keypad, reset the alarm system to “ON.” The “BATT” code should now be cleared. If it isn’t, contact your security company for a special reset code.
FAQ
1. How often should I replace the battery in my Honeywell alarm system?
You should replace the battery in your Honeywell alarm system at least once every 3-5 years. It is important to regularly check the battery’s voltage and replace it if it falls below the recommended level. This will ensure that your alarm system continues to function properly and provide reliable protection for your home or business.
2. What type of battery should I use to replace the old one in my Honeywell alarm system?
It is recommended to use a high-quality, long-lasting battery that is specifically designed for Honeywell alarm systems. The most common type of battery used in these systems is a 12-volt sealed lead-acid battery. Make sure to check the specifications of your alarm system to ensure compatibility before purchasing a replacement battery.
3. How do I replace the battery in my Honeywell alarm system?
To replace the battery in your Honeywell alarm system, follow these steps:
1. Disconnect the power supply to the alarm system.
2. Open the control panel or battery compartment.
3. Remove the old battery by disconnecting the wires or clips attached to it.
4. Connect the new battery to the wires or clips, ensuring proper polarity.
5. Close the control panel or battery compartment.
6. Reconnect the power supply and test the system to ensure it is functioning correctly.
4. Can I replace the battery in my Honeywell alarm system myself, or do I need to hire a professional?
Replacing the battery in your Honeywell alarm system is a relatively simple task that can be done by most homeowners. However, if you are unsure or uncomfortable working with electrical components, it is recommended to hire a professional to ensure the job is done correctly and safely. They will have the necessary knowledge and experience to replace the battery and test the system to ensure proper functioning.
5. What should I do if my Honeywell alarm system is still not working after replacing the battery?
If your Honeywell alarm system is not working properly even after replacing the battery, there may be an underlying issue that requires further troubleshooting or professional assistance. Check the connections and wiring to ensure they are secure and properly connected. If the problem persists, consult the user manual or contact Honeywell customer support for further guidance and assistance.