Quck answer
Reupholstering a chair with studs can give it a fresh and stylish look. Here are the basic steps to reupholster a chair with studs:
1. Remove the old fabric: Start by carefully removing the old fabric from the chair using a staple remover or a flathead screwdriver.
2. Measure and cut new fabric: Measure the dimensions of the chair seat and backrest, and cut the new fabric accordingly. Leave some extra fabric for tucking and stapling.
3. Attach the new fabric: Starting from one side, pull the fabric taut and staple it to the chair frame. Continue stapling along the edges, making sure the fabric is smooth and wrinkle-free.
4. Add the studs: Once the fabric is securely attached, use a stud pusher or a rubber mallet to insert the studs along the edges of the chair. Space them evenly for a professional look.
5. Finishing touches: Trim any excess fabric, and make sure all the staples are hidden. Clean the chair and admire your newly reupholstered piece.
Reupholstering a chair with studs may require some patience and attention to detail, but the end result is a beautiful and customized piece of furniture.
Revamping old chairs by reupholstering them is a cost-effective way of giving a room a fresh look. Studs and nailhead trims are great embellishments that can add character to any fabric, whether it is leather or cotton. Using upholstery studs is not as difficult as it may seem, whether you are removing the old ones or adding new ones. They are simpler to remove than staples and easier to add than fancy trims that require sewing. Adding studs to a reupholstered chair can breathe new life into an old piece of furniture.
Step 1
Remove the old studs by using a tack lifter, which looks like a flat-head screwdriver with a forked blade. These are available at hardware and home improvement stores.
Step 2
Keep the old studs in a bowl to avoid losing them or having them lying around where someone could step on them with their bare feet.
Step 3
Cut the old fabric away from the back and seat of the chair with a utility knife. Check the condition of the foam underneath and remove any foam that is not in good shape.
Step 4
If the foam is in good condition, spray it with adhesive and press it onto the seat and back of the chair. Use a utility knife to trim away any excess.
Step 5
Spray a light coating of adhesive onto the foam and attach the batting. Let it dry for five to ten seconds, then trim away any excess using scissors.
Step 6
Lay the new fabric over the foam and batting on the seat and back of the chair. Use chalk to trace the shape of where the fabric will fit onto the back and seat of the chair.
Step 7
Cut the fabric, leaving at least 1/8 inch extra outside of the chalk line.
Step 8
Tuck the 1/8 inch under the edges and iron it flat. Pull the fabric taut over the foam and batting, and secure it with a few staples.
Step 9
Add the new or old studs by tapping them into place using a small hammer, or replace them entirely with new nailhead trim for a complete chair makeover.
FAQ
1. What materials do I need to reupholster a chair with studs?
To reupholster a chair with studs, you will need the following materials:
– Upholstery fabric of your choice
– Foam padding or batting
– Heavy-duty stapler
– Upholstery studs or nailhead trim
– Hammer or rubber mallet
– Scissors or fabric cutter
– Screwdriver or staple remover (for removing the old fabric)
2. How do I remove the old fabric from the chair?
To remove the old fabric from the chair, start by flipping the chair upside down. Use a screwdriver or staple remover to carefully remove the staples or nails holding the fabric in place. Once the fabric is removed, inspect the chair for any damages or repairs that need to be done before reupholstering.
3. How do I cut and attach the new fabric?
Measure and cut the new upholstery fabric to fit the chair, leaving a few inches of excess fabric on all sides. Start by attaching the fabric to the chair using a heavy-duty stapler. Pull the fabric tight while stapling to ensure a smooth and wrinkle-free finish. Trim any excess fabric if necessary.
4. How do I add studs to the chair?
To add studs to the chair, determine the placement and spacing of the studs. Using a hammer or rubber mallet, gently tap the upholstery studs or nailhead trim into the fabric at the desired locations. Make sure to apply even pressure to avoid damaging the fabric or the studs.
5. Any tips for a professional-looking finish?
For a professional-looking finish, take your time and be patient during the reupholstering process. Make sure to pull the fabric tight and staple securely to achieve a smooth and neat appearance. Additionally, practice proper spacing and alignment when adding the studs to create a symmetrical and polished look.