Quck answer
If your house door handle keeps coming off, there are a few simple steps you can follow to fix it. First, remove any screws or bolts holding the handle in place. Inspect the handle and the door for any damage or wear. If you notice any, replace the damaged parts. Next, clean the handle and the door thoroughly to remove any dirt or debris. Apply a small amount of lubricant to the moving parts of the handle. Finally, reattach the handle using the screws or bolts and test it to ensure it is secure.
Over time, a house door handle may become loose and fall off. Even after reattaching the handle, it may continue to come off. This can cause the locking mechanism to malfunction and fail to properly secure the door. The issue is often caused by a missing or loose screw in the plate of the house door. Rather than buying a new door or hiring a carpenter, you can save money by fixing the problem yourself.
Step 1
Check the house door handle for any external screws. Remove them to fully detach the handle. If there are no external screws, hold the outside of the house door handle steady and turn the inside handle clockwise to unscrew it. Remove the inside door handle completely.
Step 2
Use a screwdriver to remove the plate from the house door. Fill any screw holes with putty and allow it to dry for a few hours. Once dry, replace the plate and use a power screwdriver to drive in the screws. If the plate does not use screws, use a metal and wood rated epoxy or superglue to secure it in place. Apply a thin coat to the plate backing and hold it firmly against the door for three to five minutes.
Step 3
Reassemble the house door handle pieces in reverse order.
Step 4
If the handle has an external screw, apply a screw locker fluid according to the product instructions. Turn the screw clockwise with a Phillips-head screwdriver until it stops turning. Allow the screw locker to dry completely for three to 12 hours before using the door handle.