Quck answer
To install a ceramic toilet paper holder, follow these steps:
1. Gather the necessary tools and materials: ceramic toilet paper holder, screws, screwdriver, measuring tape, pencil, level, drill, and wall anchors (if needed).
2. Choose the desired location for the holder. It should be within easy reach of the toilet and at a comfortable height.
3. Use a measuring tape to mark the exact placement of the holder on the wall. Use a pencil to make small marks for reference.
4. Use a level to ensure that the marks are straight and even.
5. If the holder requires wall anchors, use a drill to create holes for them. Insert the anchors securely into the wall.
6. Position the holder against the wall and align it with the marks. Use a screwdriver to attach the holder to the wall, using the screws provided.
7. Double-check that the holder is securely attached and level.
8. Test the holder by placing a roll of toilet paper on it.
Now you have successfully installed a ceramic toilet paper holder. Enjoy the convenience and functionality it brings to your bathroom.
If you’re into white glazed ceramic bathroom fixtures, you might want to consider adding a ceramic toilet paper holder to your collection. While it may seem easier to go for the traditional metal toilet paper holders, installing a ceramic one is not that hard. However, you need to make sure you measure and prepare the thinset used for adhesion properly.
Important Safety Precautions
Before proceeding, make sure you read the package instructions for the thinset mortar. It’s best to work on this project with the exhaust fan on and the bathroom doors and windows open to ensure proper ventilation. Keep small children away while working with the thinset. Place a soft rug or towel beneath the toilet paper holder while it dries to prevent breakage in case the adhesion process fails. If it does break, clean it up thoroughly to avoid accidents.
Check the depth of your toilet paper holder before using thinset. If the protrusion is about one-quarter-inch thick or less, thinset mortar should work fine. If the fixture bumps out significantly in the back, you should use mudset mortar instead.
Steps for Installing a Ceramic Toilet Paper Holder
Start by sitting on your toilet with the lid closed to determine where you want to place the toilet paper holder. Reach out your arm as you would when using the restroom and mark where you want the center of the holder to be. Hold the fixture against the wall using the center mark as a guide and trace around the outside of the fixture with a pencil. Score the wall with a utility knife, cutting 1/8 inch into the drywall. Remove and dispose of the pieces. This is where you’ll apply the thinset mortar.
How to Apply Thinset Mortar
Start by cleaning the drywall with a damp sponge or cloth and let it dry thoroughly. Mix the thinset mortar according to the manufacturer’s instructions. Don’t use grout as it has inferior tensile strength and bonding ability. Apply the thinset mortar into the hole, letting it slightly lip around the opening and cover the entire inner surface of the hole. Press the toilet paper holder into the space and fill the rest of the hole with excess thinset. Clean any thinset that has left the boundary of the hole immediately by wiping it clean with a damp cloth.
To secure the fixture to the wall, firmly hold it in place and use sturdy masking tape for support. The tape should remain intact for about four to six hours until the thinset adhesive has completely dried. Once the time has passed, carefully remove the tape and the fixture should be firmly attached and ready for use.