Quck answer
To clean brushed nickel bathroom fixtures, follow these steps:
1. Gather your supplies: soft cloth, mild soap or dish detergent, warm water, and a non-abrasive cleaner (optional).
2. Start by wiping the fixtures with a soft cloth dipped in warm water and mild soap. This will remove any surface dirt and grime.
3. If there are stubborn stains or water spots, you can use a non-abrasive cleaner specifically designed for brushed nickel. Follow the instructions on the cleaner and gently scrub the affected areas.
4. Rinse the fixtures thoroughly with warm water to remove any soap or cleaner residue.
5. Dry the fixtures completely using a soft cloth to prevent water spots or streaks.
Remember to avoid using abrasive cleaners or tools, as they can scratch the brushed nickel finish. Regular cleaning will help maintain the shine and appearance of your bathroom fixtures.
Brushed nickel bathroom fixtures are highly sought-after due to their enduring finish and ability to resist water spots. While the warm tone may seem challenging to clean, the process is actually quite similar to other fixtures. The way light and shadow interact on the metal’s surface makes brushed nickel both chic and easy to maintain.
How to Clean Brushed Nickel
To clean off light dirt from brushed nickel, simply wipe the surface with a soft cloth dampened with clean water. If you do this every day, you can prevent dirt from accumulating on the surface. Alternatively, you can use glass cleaner to clean light dirt from brushed nickel, but be sure it does not contain alcohol or ammonia.
To remove hard water stains, spray a soft cloth with a solution consisting of equal parts water and white vinegar. When you clean brushed nickel fixtures, it is important to rinse the finish thoroughly afterwards. After rinsing the brushed nickel with a clean, damp cloth, dry the finish with a soft, dry cloth.
Due to regular cleaning and frequent use, you should also wax your brushed nickel bathroom fixtures every four weeks to restore their shine. Spread paste wax on the brushed nickel surface with a soft, dry cloth and work it in using small, circular motions. Once the fixture is fully covered in wax, buff the nickel with a soft, dry cloth.
Precautions When Cleaning Brushed Nickel
When cleaning brushed nickel, refrain from using bleach, alcohol, or ammonia-based cleaners. Avoid using abrasive cleaning products or cloths, as they can damage the finish of your fixtures.
If acidic substances are left on brushed nickel for prolonged periods, they can leave dark marks. Finally, it is best not to leave sponges, towels, or other cleaning pads in your sink overnight, as they can trap water and cause stains and discoloration on brushed nickel.
Using Simple Green Cleaner
If you are using Simple Green All-Purpose Cleaner to clean your brushed nickel bathroom fixtures, ensure that you dilute the product correctly. If there is heavy soil on your fixtures, you do not need to dilute the product. For moderate soil, dilute 1 ounce of solution in 1 cup of water. For light cleaning, such as dust and fingerprints, dilute 1 ounce of solution in 4 cups of water.
When cleaning heavy soil, prewet the surface to help the solution penetrate the dirt and grime. Allow the solution to sit on the brushed nickel for a minute, then scrub the fixture with a nonabrasive scrubbing pad. Rinse the area with clean water and a soft, damp cloth.
Always dry and polish the surface with a clean cloth to maintain the polished finish without leaving streaks.