Quck answer
To lubricate a John Deere riding lawn mower, follow these steps:
1. Park the mower on a flat surface and make sure the engine is off.
2. Locate the lubrication points, which include the mower deck spindles, pivot points, and wheel bearings.
3. Clean any dirt or debris from the lubrication points using a brush or rag.
4. Apply a suitable lubricant, such as grease or oil, to the lubrication points. Refer to the mower’s manual for the recommended lubricant type and amount.
5. Move the mower’s parts back and forth to distribute the lubricant evenly.
6. Check the lubrication points regularly and reapply lubricant as needed to keep the mower running smoothly.
Regular greasing is essential for maintaining a John Deere lawn tractor. Two main systems require lubrication – the front axle and front wheels, and the spindles on the mower deck. Without proper lubrication, the mower’s moving parts will dry and start to rub against each other, causing wear and damage. Grease the machine every 25 hours of use, which only takes about 5 minutes to complete.
Greasing the Front Axle
Step 1
First, park the lawn mower on a hard, level surface and set the parking brake. Ensure that the wheels are straight ahead.
Step 2
Locate the grease nipple on the inside of the right wheel, place the end of the grease gun over the nipple, and pump the handle until there is pressure in the handle of the grease gun. Remove the end of the grease gun from the nipple and repeat on the other tire.
Step 3
Locate the grease nipple at the front of the right wheel shaft directly beside the tire. Place the end of the grease gun on the nipple and pump the grease gun handle until grease starts to come out of the top of the bushing. Remove the end of the grease gun and repeat on the left side.
Step 4
Place the end of the grease gun onto the grease nipple in the middle of the axle, directly underneath. Pump the handle until there is pressure in the handle. Remove the end of the grease gun from the nipple.
Lubricating the Mower Deck
Step 1
Lower the mower deck to the lowest setting.
Step 2
Locate the nipple on the right side of the mower deck, on top of the blade brake pivot. Spray the brake blade pivot with all-purpose spray to lubricate, and repeat on the left side.
Step 3
Locate the deck idler pivot, to the left of the right-hand blade spindle. Spray the pivot point with all-purpose spray.
FAQ
1. How often should I lubricate my John Deere riding lawn mower?
You should lubricate your John Deere riding lawn mower at least once a year or after every 50 hours of use, whichever comes first. Regular lubrication is essential to keep the mower running smoothly and to prevent wear and tear on the moving parts. Make sure to consult your mower’s user manual for specific instructions on which parts need lubrication and the type of lubricant to use.
2. What parts of my John Deere riding lawn mower should I lubricate?
There are several parts of your John Deere riding lawn mower that require lubrication. These include the mower deck spindles, wheel bearings, steering components, and various pivot points. Lubricating these parts will ensure smooth operation and prolong the lifespan of your mower. It’s important to refer to your mower’s user manual for a detailed lubrication guide, as different models may have specific lubrication points.
3. How do I properly lubricate my John Deere riding lawn mower?
To properly lubricate your John Deere riding lawn mower, follow these steps:
– Start by cleaning the areas that require lubrication to remove any dirt or debris.
– Use the appropriate lubricant recommended by John Deere for each specific part.
– Apply the lubricant to the designated areas, ensuring thorough coverage.
– Move the parts back and forth or rotate them to distribute the lubricant evenly.
– Wipe off any excess lubricant to prevent accumulation of dirt and debris.
Remember to always refer to your mower’s user manual for specific instructions on lubrication to ensure you are following the correct procedures.