Quck answer
To remove a Vitamix blade, follow these steps:
1. Unplug the blender and remove the container from the base.
2. Turn the container upside down and locate the rubber drive socket at the bottom.
3. Insert a wrench or a special Vitamix blade removal tool into the drive socket.
4. Hold the container securely and turn the wrench counterclockwise to loosen the blade assembly.
5. Once the blade assembly is loose, carefully remove it from the container.
6. Clean the blade and container thoroughly before reassembly.
7. To reattach the blade, simply reverse the steps and tighten it clockwise using the wrench or tool.
Vitamix has been in the blending industry for almost 90 years and was among the first companies to present their product in a 30-minute direct response infomercial back in 1949. The motor of the blender rotates the ultra-sharp blades at high speeds, which is enough to cook food by friction, making hot soups and ice cream in the Vitamix blender container. Although Vitamix advises against blade removal, it may be necessary to clean them thoroughly.
Step 1
Remove the Vitamix blender container from the Vitamix base. Take off the container’s lid and flip the container over, placing it on a flat surface.
Step 2
Examine the bottom part of the container and locate the large, circular, silver retainer nut. The circular nut has a wide lip or lobe with two slots approximately one inch in width located directly opposite each other on the lobe.
Step 3
Place the screwdriver shaft horizontally across one of the lob slots on the retainer nut. The shaft’s center should rest against the drive spline in the middle of the retainer nut, with the screwdriver tip just past the spline.
Step 4
Securely hold the Vitamix container while rotating the screwdriver counterclockwise. As the screwdriver turns horizontally, its shaft spins the retainer nut, making use of the drive spline as leverage.
Step 5
Continue turning the retainer nut by hand until you can eliminate it from the blender container. Flip the blender container right-side up and place a thick cloth over the Vitamix blender blades inside the bottom of the container. With the cloth, grasp the blades and lift them straight up from the container.
FAQ
1. Can I remove the Vitamix blade for cleaning?
Yes, you can remove the Vitamix blade for cleaning. To do so, make sure the blender is turned off and unplugged. Remove the blender pitcher from the base and turn it upside down. Locate the blade assembly at the bottom of the pitcher. Twist the blade assembly counterclockwise to remove it from the pitcher. Wash the blade assembly with warm soapy water and rinse it thoroughly before reattaching it to the pitcher.
2. Do I need any special tools to remove the Vitamix blade?
No, you do not need any special tools to remove the Vitamix blade. The blade assembly is designed to be easily removed by hand. Simply twist it counterclockwise to detach it from the pitcher. However, it is important to handle the blade assembly with caution to avoid any injuries, as the blades are sharp.
3. How often should I remove and clean the Vitamix blade?
It is recommended to remove and clean the Vitamix blade after each use. This helps to prevent any buildup of food particles and ensures optimal performance of the blender. Regular cleaning also helps to extend the lifespan of the blade assembly.
4. Can I put the Vitamix blade in the dishwasher?
Yes, the Vitamix blade assembly is dishwasher safe. However, it is recommended to hand wash it for better longevity. If you choose to use the dishwasher, place the blade assembly on the top rack and use a gentle cycle with mild detergent. Avoid using abrasive scrubbers or harsh chemicals that could damage the blade.
5. Are there any safety precautions I should take when removing the Vitamix blade?
Yes, there are a few safety precautions to keep in mind when removing the Vitamix blade. Always make sure the blender is turned off and unplugged before attempting to remove the blade. Handle the blade assembly with caution, as the blades are sharp. Avoid touching the blades directly to prevent any injuries. Take your time and be gentle when removing and reattaching the blade assembly to avoid any damage to the pitcher.
6. Can I sharpen the Vitamix blade if it becomes dull?
No, the Vitamix blade is not designed to be sharpened. If you notice that the blade is becoming dull or not performing as well, it may be time to replace the blade assembly. Vitamix offers replacement parts for their blenders, including the blade assembly, which can be easily purchased online or through authorized retailers.
7. Are there any troubleshooting tips if the Vitamix blade is difficult to remove?
If you are having difficulty removing the Vitamix blade, try running warm water over the blade assembly to loosen any food particles or debris that may be causing it to stick. You can also use a mild detergent or vinegar solution to soak the blade assembly for a few minutes before attempting to twist it off. If the issue persists, contact Vitamix customer service for further assistance.