Quck answer
To remove a ball head joint from your shower, follow these steps:
1. Turn off the water supply to the shower.
2. Locate the ball head joint, which is usually located at the end of the shower arm.
3. Use an adjustable wrench or pliers to grip the ball head joint.
4. Apply steady pressure and turn counterclockwise to loosen the joint.
5. Once the joint is loose, continue turning until it can be easily removed by hand.
6. Clean the threads of the shower arm and the ball head joint to remove any dirt or debris.
7. To reinstall, simply screw the new ball head joint onto the shower arm in a clockwise direction.
8. Turn on the water supply and check for any leaks.
By following these steps, you’ll be able to remove and replace the ball head joint in your shower, allowing for easy maintenance and repairs.
Ball head joints in your showerhead allow it to move and adjust the water direction. Over time, the joints can become damaged due to rust or mineral deposits from the water. Many modern showerheads have the ball joint hidden inside to protect it from these issues. However, if the joint is located on the outside of the showerhead, it can be easily removed for cleaning or replacement.
Removing Removable Ball Head Joints
To remove a removable ball head joint, you will need adjustable pliers or a wrench, as well as plumber’s tape or a small towel. Use the tape or towel to wrap around the pliers or wrench to prevent them from damaging the showerhead. Next, locate and turn the nut counterclockwise to loosen and remove the ball head joint by hand.
Removing Fixed Ball Head Joints
Older showerhead models may have a fixed ball head joint that cannot be removed without taking off the entire shower arm. Check to see if the joint is secured by a nut. If not, the arm will need to be removed. Use pliers or a wrench wrapped with tape or a towel to loosen and remove the arm counterclockwise by hand.
Removing Stuck Ball Head Joints
If the ball head joint or arm is stuck, try using white vinegar to eat away at any rust. Fill a plastic bag with vinegar, secure it over the joint, and let it sit for several hours or overnight. If the joint is still stuck, try another vinegar bath or a plumbing lubricant to help it twist off easily.