Quck answer
To replace a retractable screen in a Larson storm door, follow these steps:
1. Remove the damaged screen: Open the storm door and locate the retainer strip at the top of the screen. Use a screwdriver to loosen the screws and remove the strip. Gently pull the old screen out of the frame.
2. Measure the new screen: Take accurate measurements of the opening where the screen will fit. Make sure to measure both the height and width.
3. Cut the new screen: Using a utility knife or scissors, cut the new screen material according to the measurements taken in step 2.
4. Install the new screen: Insert the new screen into the frame, ensuring it fits snugly. Use a rubber spline roller to press the screen into the groove. Trim any excess screen material.
5. Reinstall the retainer strip: Place the retainer strip back into its original position and tighten the screws to secure the new screen.
6. Test the screen: Open and close the storm door to ensure the new screen operates smoothly.
By following these steps, you can easily replace a retractable screen in a Larson storm door.
If you have a Larson storm door with a retractable screen, you may need to replace it if it becomes damaged. The Larson retractable screen is unique because it rolls up and is stored in a cassette at the top of the door when not in use. To replace the screen, you will need to order the necessary parts from Larson and follow these steps:
Step 1: Loosen the Screws
Using a screwdriver, loosen the screws on the screen assembly cover located at the top of the Larson storm door. Once the screws are loose, remove the cover from the door.
Step 2: Remove the Screen Roll
Lift the screen roll from the door by pushing up on it. The screen roll will come off of the door easily.
Step 3: Install the New Screen Roll
Fit the new screen roll onto the door and pull down to snap it in place.
Step 4: Secure the Screen Assembly Cover
Place the screen assembly cover over the screen roll and screw it in place.
FAQ
1. How do I know if I need to replace the retractable screen in my Larson storm door?
If your retractable screen is damaged, torn, or no longer functions properly, it is likely time to replace it. Signs of a damaged screen include holes, sagging, or difficulty in retracting and extending it.
2. What tools do I need to replace a retractable screen in a Larson storm door?
To replace a retractable screen, you will need a screwdriver, pliers, a utility knife, and a replacement screen kit. The kit typically includes the new screen material, spline, and a spline roller.
3. How do I remove the old retractable screen from my Larson storm door?
To remove the old retractable screen, locate the screws or clips holding it in place. Use a screwdriver or pliers to remove the screws or release the clips. Carefully pull the old screen out of the frame.
4. How do I measure the size of the replacement screen for my Larson storm door?
To measure the size of the replacement screen, measure the width and height of the screen frame. Take precise measurements of the visible glass area and subtract a small amount to allow for the new screen to fit snugly.
5. How do I install the replacement retractable screen in my Larson storm door?
To install the replacement retractable screen, position the new screen material over the frame. Use the spline roller to press the spline into the groove, securing the screen in place. Trim any excess screen material with a utility knife.
6. Can I replace the retractable screen in my Larson storm door by myself, or should I hire a professional?
Replacing the retractable screen in a Larson storm door can generally be done by yourself if you have basic DIY skills. However, if you are not comfortable or experienced with this type of project, it may be best to hire a professional to ensure proper installation.
7. How often do I need to replace the retractable screen in my Larson storm door?
The lifespan of a retractable screen can vary depending on usage and maintenance. With proper care, a Larson storm door retractable screen can last several years. However, if the screen becomes damaged or worn, it should be replaced as soon as possible to maintain the functionality of the door.