Quck answer
Sloan faucets are known for their durability and reliability, but like any other plumbing fixture, they can sometimes experience issues. To troubleshoot a Sloan faucet, follow these steps:
1. Check the water supply: Ensure that the water supply valves are fully open and there are no obstructions or leaks in the supply lines.
2. Inspect the sensor: If your Sloan faucet has a sensor, make sure it is clean and free from any dirt or debris. Clean it with a soft cloth or sponge if necessary.
3. Test the batteries or power source: If your Sloan faucet is not working, check the batteries or power source. Replace the batteries or ensure that the power source is functioning properly.
4. Clean the aerator: If the water flow is weak or uneven, remove the aerator and clean it thoroughly. Sediment or debris may be causing the issue.
5. Contact Sloan customer service: If none of the above steps resolve the problem, contact Sloan customer service for further assistance. They will be able to provide specific troubleshooting steps or arrange for repairs if needed.
By following these troubleshooting steps, you can identify and resolve common issues with Sloan faucets, ensuring they continue to function properly.
A touchless faucet is a great addition to any kitchen or bathroom, but it can become frustrating if it starts to malfunction. If the Sloan sensor faucet won’t stop running, it may need to be cleaned or have the battery replaced. Follow these motion sensor faucet troubleshooting steps to find out what needs to be done to fix the Sloan faucet.
Troubleshooting the Motion Sensor Faucet
If you recently installed or replaced the Sloan faucet, make sure to remove the adhesive label from the top of the sensor eye and check that no adhesive remains and is blocking the eye. Test the fixture by pressing the button on the bottom of the spout.
If you hear a click from the solenoid valve when the water supply is open but no water flows through the faucet, clean the water supply strainer located by the flex hose.
Before attempting to replace the Sloan faucet or fiddling with the water valves and battery covers, ensure that the faucet is properly installed by checking the connections and tightening the screws.
Replacing the Faucet Battery
If the Sloan auto faucet drips continuously, it may need a new battery. Replacing the automatic faucet battery is a simple process. If the LED indicator light blinks every time the faucet is used, it’s an indication that the battery needs to be replaced, according to Plumber Magazine.
Cut off the water supply stops before replacing the Sloan faucet battery. Locate the small screw on the faucet face and remove it with a hex wrench. This will loosen the throat plate, allowing you to remove it and the battery cover, which requires a Phillips screwdriver.
Take out the battery and replace it. You may need to use a flathead screwdriver to gently push the battery out of its slot. Use a cotton swab dipped in rubbing alcohol to clean the inside of the battery housing, ensuring that the battery has a good connection.
When to Replace the Solenoid
If you hear a low-toned click from the solenoid, it may be on its way out, according to Sloan Repair. The solenoid may be struggling with water pressure or piping if you hear a loud sound in short repetitions, such as hammering or buzzing. Check that the water pressure flowing through the pipe is appropriate for the pipe’s diameter.
Check the valves, as they can cause the faucet to drip if they do not close correctly. Start by inspecting the diaphragm, connections, and components of the Sloan faucet. If the valves are working properly, the solenoid may need to be replaced.