Quck answer
Securing lawn decorations is essential to prevent theft or damage. Here are some tips to hold down and secure your lawn decorations:
1. Use stakes or anchors: Secure lightweight decorations with stakes or anchors to prevent them from being blown away by strong winds.
2. Secure with wires or zip ties: For larger decorations, use wires or zip ties to fasten them securely to fences, trees, or other stable structures.
3. Install security cameras: Installing security cameras can deter thieves and provide evidence if any decorations are stolen or damaged.
4. Use motion-activated lights: Motion-activated lights can scare away potential thieves and provide extra security at night.
5. Store valuable decorations: If you have valuable decorations, consider storing them indoors when not in use to prevent theft or damage.
By following these tips, you can hold down and secure your lawn decorations, ensuring they stay in place and protected.
Modern lawn decorations are often made of lightweight materials that can easily be knocked over by strong winds. Inflatable seasonal decorations, in particular, require some form of anchoring to prevent them from flying away. The best way to secure lawn decorations depends on their construction, but usually, it involves adding weight or using some form of staking or tethering material.
Fill Hollow Plastic Decorations
Hollow plastic or resin decorations, such as garden gnomes or birdbaths, can be filled with sand, water, or pea gravel through a small hole in the item. If there is no hole, you can drill one in an inconspicuous area. Check the assembly instructions or packaging for recommended filling materials and procedures. If there are no instructions, look for a hole or plastic plug and fill the item until it is full. Replace the plug or use clear plastic tape to seal it.
Use Garden Staples
Garden staples, U-shaped wire pieces, are useful for securing lawn decorations that have a hole through the bottom. Push one end of the staple through the hole and tap it into the ground with a rubber mallet. Use two or more staples for added stability. If there is no hole, drill one and use homemade garden staples made from coat hangers or stiff wire.
Install Theft-Resistant Security Stakes
If you are concerned about theft, use corkscrew-style stakes with hooks to secure your decorations. Twist the stake into the ground, run metal security cable through a hole in your decoration, and through the loop in the top of the stake. Add a lock for extra security.
To secure several decor pieces in close proximity, you only need one corkscrew stake. It’s best to keep the decor as close to the stake as possible to make the locking cable less visible. Alternatively, you can add wood mulch or decorative rocks over the cabling if rocks are an option, such as in a flower bed. There are various corkscrew-style security stakes available, some of which are less visible than old-school dog-tethering stakes.
Large inflatables such as outdoor trampolines or canopies must be tethered to keep them in place. The initial packaging should include stakes and tethering straps, but replacements are available if they are lost or missing. Once the inflatable is in place, stretch out the tethers and set one stake near each one. Start by loosely tapping in one stake to hold one tether and then work your way around, gradually tightening each one until all tethers are strapped down as tightly as possible. In high-wind areas, use at least one corkscrew-style stake for added security as they are less likely to come out during extreme winds.